Prinsco Meter Pits provide protection and ease of access for gas/water meters residential and commercial applications. Made from high density polyethylene, meter pits are non-corrosive, crack resistant, and have a 75-year service life.

Ford® meter pits and covers, when properly installed and carefully maintained, will provide a safe, secure meter pit setting for many years. Proper meter pit design places the bottom of the meter below the frost line.

In summary, the basic points of meter pit design provided by Ford Plastic Pit Setters are as follows: (1) Keep the meter pit depth below the deepest frost penetration line; (2) Keep the meter pit diameter sufficiently large to provide a good base of warm soil as well as to prevent pipe from freezing due to “frost jump” from the pit walls ...

A water meter pit is a below ground chamber or pit, found in the water service chain, in between a water main and a residence or business that houses a water meter assembly, used for localities to periodically read the amount of water usage for billing purposes.

Experience time savings, space savings, and extra stability when you choose to utilize a pit setter in your water service lateral. These devices contain an in-ground enclosure that houses shut-off valves, water meter, and optional check valves or bypass.

Plastic Meter Pits: Plastic meter pits shall be of a two-piece design with a nominal 24 inch diameter by 36 inch high base unit and a 12 inch top unit that tapers from a 24 inch diameter to accept a standard 20 inch diameter dome unit. The units shall be …

effective meter pit design and installation. Pit Size: The meter pit must be deep enough to extend below the deepest frost penetration line. The pit diameter must be large enough to provide a minimum 2-inch clearance between the riser pipes (including valves) and the pit wall.

Apr 2, 2024 · What does a water meter pit look like? The appearance of a water meter pit may vary, depending on the specific model design, intended application setting, and materials used in the manufacturing process. However, the main build principles are generally the same, so we’ll use the Ford PDVH 288 Plastic Pit to help us showcase the typical ...

The Meter Pit has the service lines attached firmly to the pit walls, with all the valves and meter coupling materials necessary to install the meter. The theory of pit design is that the depth of the service shall be below that of the deepest frost level and the heat from the base of the meter pit shall circulate and keep the meter setting ...

Meter Pit Procedures & Installation Requirements . In conformance with the City of Kalispell’s Standards for Design and Construction all new construction , existing development, and reconstruction require the installation of a water meter pit or vault. 1. Water Service: